Tom’s visiting makes him more convinced on the brand Thunder Laser
On November 4th,2016, in order to know about Thunder Laser, our US customer Tom coming from afar to visit a true-life Thunder Laser.
Accompanied by Yomiko, Tom visited the sample demonstration room and tested the materials brought. We were all excited to know the testing result. Because Tom had tested it with other laser systems and was disappointed about the effect.
Laser wood model cutting–universal manipulator
laser cutting machine is widely used for cutting wood model; this time, Thunder laser will cut the universal manipulator! laser cutter file：Download Required items: 3mm plywood and some lines standard laser head Thunder laser used: Model: Nova 35laser cutter machine Laser Tube: 80 watt Setting: Processing Mode: cut Speed: 20mm/s Max power: 50% Min power: […]
Laser acrylic cutting – DIY acrylic clock
We have cut many wood models before, today we will cut a model by using acrylic material. The model we will cut is a DIY acrylic clock. laser cutter file：Download Required items: Material:3mm acrylic Laser head:Standard laser head Thunder laser used: Model:Nova 35 laser cutter machine Laser Tube: 80 watt Setting: Processing Mode: cut Speed: […]
Why noisy while moving laser head front and back, how to adjust?
When you move laser head front and back, two couplings make a lot of noise.
The machine won’t turn on
If it’s pressed, please reset it, like below.
Laser wood model cutting –Eiffel tower
laser cutting machine is widely used for cutting wood model; this time, Thunder laser will cut the Eiffel tower model! laser cutter file：Download Required items: Material:3mm plywood Laser head:standerd head Thunder laser used: Model: Nova 35laser cutter machine Laser Tube: 80 watt Setting: Processing Mode: cut Speed: 20mm/s Max power: 60% Min power: 70% The […]
SegMaker Exhibition Center of Thunder Laser System
In response to national call for independent innovation, to promote and cultivate more innovation projects and independent learning talent, Thunder Laser cooperate with Shenzhen SEG setting up an experience center to help more children develop their innovation and hands-on ability. Thanks SEG for providing the space and all staff there including Amy and Ben from Thunderlaser that carried the laser upstairs and provide tech support to have the laser settled down and set up..
111
Frequently Asked Questions Buying guide About machine and parts About software About material application
How to calibrate the working table to level.
There are three cases.
1. Two sides of the working table are not of the same height.
Some point of the same piece of materials can not be cut through, why
Some point of the same piece of materials cannot be cut through, why?
This problem is mainly caused by following three reasons:
