First use of laser engraving machine, you need to master the operation of the machine, starting from the connection to shut down this series of operations need to reach the point of proficiency.
Secondly, your laser engraving machine installed on the software you have to be able to use it, this is not easy. The operation software that when different manufacturer leaves the factory, installs for you is different, unless he stipulated designedly, otherwise the software that manufacturer is him installation buys will be equipped for you. This is why many of our laser engraving machine manufacturers recommend after-sales training, sometimes a few days of training is much more efficient than their own exploration, and can be put into production quickly.
Again, cutting engraving parameters to understand, such as you cut and engraving different thickness of acrylic, how much power, how much speed, about the scope you have to know, otherwise a little bit to try the best cutting effect will be a waste of time. The solution is to consult the after-sales technology directly, and the cutting parameter table is basically available in every manufacturer.
In addition, the optical path adjustment is a big problem, laser equipment factory will adjust the optical path in advance, generally no problem, and sometimes the equipment will be used after a little time there will be optical path deviation, resulting in the effect of engraving and cutting worse, at this time you need to adjust, how to adjust is also a big project, generally recommended to find technical personnel. He told the technology about the specific problems of his carving.Professional technicians can usually find answers according to the problems that arise;If you want to adjust their own is also possible, ask the technology to adjust the optical path manual, their own slowly tune can also be.
Thirdly, safety issues, when the equipment fails, you must know how to deal with it, you can not repair it, but you have to deal with the failure urgently to prevent unnecessary losses and accidents.
Finally, many small problems of engraving may make you unprepared (laser tube life, reflector, focusing lens, etc.), at this time do not worry, laser engraving machine as a precision equipment, market adjustment is a normal phenomenon, and laser machine parts more, joint use of various accessories problems, may lead to our equipment. You have to be patient to investigate. And to learn the maintenance of equipment, as far as possible so that laser equipment for our longer service.