fbpx

APPLICATION
>Materials

Our specialized Application Center continues to expand our library of
laser-applicable materials. A wider range of material applications
allows you to be creative without being limited.

Mars Laser Cutter

Mars – Laser System

 


Installed with the high speed servo motor systems, the Mars laser cutters are working at an unbelievable speed with excellent quality. It’s especially good for customers who need to mass produce their products. There’re different sizes of Mars laser cutters for your choice.

DownloadDownloadDownload

Standard Features

Technical Specifications

Laser SystemMARS 90(Plus)MARS 130(Plus)MARS 160(Plus)
Laser Tube Wattage80-100Watt100-130Watt100-150Watt
Work Area900x600mm(35.4″ x 23.6″)1300x900mm(51.2″x35.4″)1600x1000mm(63.0″x39.4″)
Max Part Size (WxLxH)Front door closed

1000x730x250mm(39.4″ x 28.7″ x9.8″)

1400x1030x250mm(55.1″ x 40.6″ x9.8″)

1700x1130x250mm(66.9″ x 44.5″ x9.8″)

Pass-through door

1000x∞x20mm(39.4″ x ∞” x0.8″)

1400x∞x20mm(55.1″ x ∞” x0.8″)

1700x∞x20mm(66.9″ x ∞” x0.8″)

Table Size1000x730mm(39.4″ x 28.7″)1400x1030mm(55.1″ x40.6″)1700x1130mm(66.9″ x 44.5″)
Z Axis Height230mm(9.1″)230mm(9.1″)230mm(9.1″)
Dimensions(WxDxH)

1500x1105x1040mm(59.1″ x 43.5″ x40.9″)

1900x1405x1040mm(74.8″ x 55.3″ x40.9″)

2200x1505x1040mm(86.6″ x 59.3″ x40.9″)

Net Weight230kgs(507lbs)310kgs(683lbs)350kgs(772lbs)
Laser TypeSealed Co2 Glass Laser Tube
CoolingWater Cooled
Motion Control SystemHigh-Speed Hybrid servo motor
Maximum Speed1000mm/S(39.4 IPS)
Speed and Power Control (engraving depth)Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating ModesOptimized raster, vector, and combined mode
Resolution(DPI)User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer InterfaceEthernet and USB Connection
Compatible Operating SystemsWindows XP/2000/Vista/7/8/10
Buffer Memory128MB Standard
Display Panel3.5″ LCD panel showing current file, total working time, laser power, speed etc.
Electrical Requirements110 to 240 volts, 50 or 60 Hz, single phase
Ventilation SystemIntegral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.
Standard FeaturesRed dot pointer, Auto focus, Motorized table, Pass-through Door, Air Assist, Water pump ,Exhaust fan, HoneyComb Table, 2″ (50.8 mm) Focus Lens, Easily adjustable Home position, LCD Display,3D Engraving ,”No water” protection, Emergency stop, Maintenance mode, Open cover protection,Hybrid servo motor
Optional Features
High Resolution HeadIncrease the resolution up to 1000DPI
Rotary AxisUse to engrave on round items
Water ChillerImprove the cooling of laser tube

Machine Size

nova35 size

nova51 size

nova63 size

Optional Items

nova35
Water Chiller
When the laser tube is working, it will produce a large amount of heat.Since the water chiller has the refrigerating capacity and can adjust the temperature intelligently to keep the temperature within a certain range, there by to ensure the stability of laser working.
nova35
Rotary Axis

Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…

nova35

Heat Alarm Detector
A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery…

nova35
HR laser head

We named Hight-Resolution head as HR head for short,it’s made by special structure for focusing the laser bean into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate…

nova35
4″ laser head

4″ laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…

nova35
Air compressor

The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…


Materials

If your material is not in the below list, our Applications Team would be happy to assist you to test it.

MaterialsEngrave Cut
Wood
Acrylic
Delrin

Cloth

Leather
Mat Board
Melamine

Paper
Mylar
Pressboard
Rubber
Wood Veneer
Fiberglass
Plastic
Cork
Corian
Twill
Anodized AluminumX
Painted MetalsX
TileX
GlassX
Coated MetalsX
CeramicsX
MarbleX
Stainless Steel*X
Brass*X
Titanium*X
Bare Metal*X

* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.

Video

FAQ

No need. We’ve added a parameter library in the software, once you find out what settings is best for a certain material;you can record it in the parameter library. Next time you cut the same material, you just need to read it from the list.

Both ok, as long as your operating system is window 2000 or XP or vista or win 7.

Our laser runs on window 2000/ XP/ vista/ wins 7 both 32bits and 64bits system.But it does not run on Mac OS.

CorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.

JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW

Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.

the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube)

https://www.thunderlaser.com.au/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html

https://www.thunderlaser.com.au/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html

As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too.

https://www.thunderlaser.com.au/video/what-laser-cutter-can-create.html

https://www.thunderlaser.com.au/video/how-to-use-your-laser-machine.html

https://www.thunderlaser.com.au/video/how-to-use-your-laser-software.html

No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.

Share:

Facebook
Twitter
Pinterest
LinkedIn
Click Cancel to reply

    Table of Contents

    On Key

    Related Posts

    small_c_popup.png

    contact us

      Full Name

      Emall Address

      Phone Number

      Message